Pure Air Technology

225-432-5619

A Safer Way
of Coming Together

A Shielded Environment For Maintaining Production in Today’s Energy Producing World

Request Info

Pure Air Technology’s purpose is to provide total interior air and contact surface protection.

We incorporate our proprietary air and surface purification process for the purpose of mitigating the dangers of Covid-19 and other airborne diseases*.

Pure Air Technology offers more than a single one time kill layer of protection. Our 3 step protective shield technology offers 24 / 7 protection up to 90 days, facilitating the return indoors and getting back to work.

Covid-19

Airborne Diseases Explained

The size of the coronavirus is well-known to scientists, 100 nanometers, 200 virions. The virus can be carried by droplets and droplet nuclei.

Most public health organization’s protective measures are designed to protect people from large droplets that carry the coronavirus. They tend to quickly fall to contact surfaces within a few feet from their source. This is why people are encouraged to stay 6 feet apart in public. However, “microdroplets” or “droplet nuclei” that are smaller than 5 microns can stay in the air as aerosols, which can hang suspended for hours and travel long distances.

The concern is that the current recommendations do not adequately protect the population if the concentration of virus-containing aerosols builds up in indoor environments with poor ventilation. This could be especially important as businesses and schools consider reopening.

Experts agree that the most effective way to reduce the spread of an airborne disease is to reduce its concentration in the air through quality ventilation. Buildings should try to increase the amount of fresh air they can bring in

Where airborne particulate go.

*Airborne Disease

An airborne disease is any disease that is caused by pathogens that can be transmitted through the air over time and distance by small particles. The relevant pathogens may be viruses, bacteria, or fungi, and they may be spread through breathing, talking, coughing, sneezing, raising of dust, spraying of liquids, toilet flushing, or any activities which generate aerosol particles or droplets.

Number of Particles in Different Diameter Ranges Emitted in One Cough and One Sneeze According to Duguid

Diameter Range (μm)	No. of Particles in a Cough	No. of particles in a Sneeze
1-2	50	26,000
2-4	290	160,000
4-8	970	350,000
8-16	1600	280,000
16-24	870	97,000
24-32	420	37,000
32-40	240	17,000
40-50	110	9000
50-75	140	10,000
75-100	85	4500
100-125	48	2500
125-150	38	1800
150-200	35	2000
200-250	29	1400
250-500	34	2100
500-1000	12	1000
1000-2000	2

Source: Data from Duguid, "The Size and Duration of Air-Carriage of Respiratory Droplets and Droplet-Nuclei." Journal of Hygiene 4:471-480, Table 3 (1946).

Global energy producing companies are getting decimated by the increase of positive Covid-19 cases throughout their respective workforces.

Whether an oil and gas production platform off-shore, a drilling rig, or a petrochemical plant on-shore, all have unique similarities helping contribute to the spread of Covid-19.

Confined indoor work areas

Shared living quarters

High volume galleys

Shared sanitation facilities

Common laundries for linens and clothing

Constant movement of employees

3 Critical Areas

For the energy producing world, the Pure Air Technology, LLC protective shield provides protection against Human Coronavirus strain 229E and other airborne diseases 24/7 for up to 90 days in 3 critical areas:

Surface contact zones

HVAC air purification and protection

Textiles, linens, and clothing protection

Application of the Pure Air Technology Shield is completed in 3 easy steps.

Step 1

Surface Preparation and Application Protection

Certified Pure Air Technology technician's will perform an initial testing protocol with a Luminometer ATP test for a base line reading
All approved surfaces will be disinfected with a Pure Air Technology PH neutral solution . At this time a new ATP test reading will be recorded
Once the surface is fully prepped and all ATP test readings are approved, the Pure-Tech application process will be initiated
ATP test readings are once again taken and the bonding is conformed with the surface
The shield protection is active
The building will get a Pure Air Technology Certification / Inspection tag showing compliance

Base Line Test

1019 RLU

After Pure Tech Shield

9 RLU

Step 2

Air Purification and Protection

The Pure-Tech product will be applied to All HVAC air stream contact points ( blower wheel, coils and return section) to protect the surfaces from viruses, bacteria, fungus, mold and mildew
Installation of UVC Lighting engineered for proper dwell time and radiance based on CFM flow rates
Supply of a custom 316 Stainless Steel frame with a HCS-229E-C19 protected filter from Pure Air Technology with proprietary VIS (vacuum infused saturation) process

Step 3

Textiles, Linens, and Clothing Protection

The Pure-Tech product can be combined with cationic or noncationic additives in the washing cycle. Anionic material will prevent the Pure-Tech product from bonding to the fabric material
Water temperature range is 110-130 deg F
Wash fabrics in normal wash / spin / rinse cycle with detergent. DO NOT DRY
Keep fabrics in washing machine. Add Pure-Tech product and start second wash cycle of wash / spin only. DO NOT RINSE.
Dry as usual
Fabrics are now protected for up to 20 normal wash cycles.
No negative effects to FRC

Pure-Techs Kill Sequence

How it works

Stage 1

Product anchors to the surface with its unique OrganoSilane base

Stage 2

Positively (+) charged nitrogen atom draws the microorganism like a magnet

Stage 3

(18) vertically stacked carbon chain ruptures the microorganism’s outer cell wall

Stage 4

Microorganism is destroyed via electrical physical kill.

HVAC UVC Light Basics

Having UV Lights integrated to the HVAC system helps mitigate for Covid-19 and airborne disease risk.

Indoor air is up to 5 times more polluted than the outside air and this can be pretty alarming. Dirt, dust, and airborne disease can also circulate through. With UV lights in your A/C system, you can prevent these harmful microorganisms and other irritants from taking over the air you breathe inside your environment. The lights break down airborne disease and kill them as they circulate through the HVAC system. UVC Lighting is proven technology and when added to Pure Air Technology Covid-19 HSE 229E Filters truly improves the air we breathe.

Contact Us

Contact our sales team today to facilitate getting back to work indoors.

Fill out my online form.

A Safer Way of Coming Together